[TRNSYS-users] type 16

[Jeff Thornton]

Steps to resolve your simulation problem:1) Read the documentation for Type 9 and Type 16 carefully.  Pay special attention to the section on interpolating data in Type 9 (don't with radiation) and the section in Type 16 about solar time versus local time.  Consider daylight savings time (if applicable).2) Create your external data file with the weather data.3) Find the Type 9 data reader and choose the expert mode (Type9e).  Choose the settings that match how your data file is set up.  4) Drag out a Type 65 online plotter and make sure that the simulation is reproducing the data from the external file correctly.5) Then find the radiation processor and choose the mode where only the total horizontal radiation is know (Type16a).  Choose the parameters carefully.6) Connect the total horizontal radiation from the data reader to the radiation processor.  Also connect the time of last read and time of next read inputs,Repeat step 4.JeffJeff Thornton  President - TESS, LLC   22 No!
 rth Carroll Street - Suite 370 Madison WI 53703 USA   Phone: 608-274-2577  Fax: 608-278-1475  E-mail: thornton at tess-inc.com  Web: www.tess-inc.com    ----- Original Message -----From: "王洋" >;wanghongyang1767 at gmail.com 
_______________________________________________
TRNSYS-users mailing list
TRNSYS-users at cae.wisc.edu
https://mailman.cae.wisc.edu/listinfo/trnsys-users
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110614/b40769ef/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 17526 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110614/b40769ef/attachment-0001.jpeg>