[TRNSYS-users] type 16
王洋
wanghongyang1767 at gmail.com
Tue Jun 14 06:13:39 PDT 2011
Dear Mr. Jezequel,
Many thanks for your answer.
Yes, I saw the Example: RadiationProcessing etc.It uses Type 16i i.e. Total
horiz. Diffuse known(Mode 5). But I only get the Global Radiation data, I
can't get the Diffuse radiation on horizontal from our weather station.
Besides that, it uses Type 9f which links to Type 16i. I can't find Type 9f
in Proforma in Simulation Studio.
Thanks a lot!
Br.
wang
2011/6/14 <trnsys-users-request at cae.wisc.edu>
> Send TRNSYS-users mailing list submissions to
> trnsys-users at cae.wisc.edu
>
> To subscribe or unsubscribe via the World Wide Web, visit
> https://mailman.cae.wisc.edu/listinfo/trnsys-users
> or, via email, send a message with subject or body 'help' to
> trnsys-users-request at cae.wisc.edu
>
> You can reach the person managing the list at
> trnsys-users-owner at cae.wisc.edu
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of TRNSYS-users digest..."
>
> Today's Topics:
>
> 1. Output Time Base for Massive Construction (Rebecca Ward)
> 2. Type 56 Active Layer Not Saving (Devin Rohan)
> 3. type 16 (??)
> 4. Re: type 16 (Adrien JEZEQUEL - ITF)
>
>
> ---------- 已转发邮件 ----------
> From: "Rebecca Ward" <rmw61 at cam.ac.uk>
> To: <trnsys-users at cae.wisc.edu>
> Date: Mon, 13 Jun 2011 19:16:18 +0100
> Subject: [TRNSYS-users] Output Time Base for Massive Construction
>
> Hi,
>
> I’m new to TRNSYS and am modelling a brick building with very thick walls
> in places but which has an extension with fairly lightweight thin walls. In
> order to pass the stability criteria, I found it necessary to increase the
> output time base to 2 – what I’m wondering is how this affects the rest of
> the analysis, in particular the thinner lightweight walls?
>
> Thanks for any help you can give.
>
> Regards,
>
> Rebecca
>
>
> ---------- 已转发邮件 ----------
> From: Devin Rohan <drohan at purdue.edu>
> To: trnsys-users at cae.wisc.edu
> Date: Mon, 13 Jun 2011 17:04:56 -0400
> Subject: [TRNSYS-users] Type 56 Active Layer Not Saving
> 1.) When I'm defining an active layer, the save button is not accessible.
> So I put it into my wall type and I can save the wall type with the active
> layer in it. When I close out of TRNBuild and start a new project, the
> layer I defined as an "active layer" get assigned to a "massless layer" and
> the active layer option is not available. Any help as to why this happens
> is appreciated.
>
> --
> Devin M. Rohan, LEED Green Associate
> Purdue University
> Civil/Architectural Engineering
> drohan at purdue.edu
>
>
> ---------- 已转发邮件 ----------
> From: 王洋 <wanghongyang1767 at gmail.com>
> To: trnsys-users at cae.wisc.edu
> Date: Tue, 14 Jun 2011 11:22:41 +0200
> Subject: [TRNSYS-users] type 16
> Dear all,
>
> I added our institute own weather data into TRNSYS using Type 9.
> But I also want to add the other weather data: Global Radiation into TRNSYS.
> As I knew, I need Type 16 and Type 9. But I don't know detailed setting and
> defination of Type 16. Please give me some advices in details.
> E.g. 1. Which Mode should I select? Mode 2? Because there are
> Global radiation, Outdoor temperature and Humidity and wind speed, wind
> direction and Air pressure in our weather station.
> 2. In details which Inputs and Outputs of Type 16 need I link to
> Type 9 and others?
> 3. How to set and define the Parameter, Input and Output in
> details?
>
> Many thanks!
>
> Br.
>
> wang
>
> 2011/6/13 <trnsys-users-request at cae.wisc.edu>
>
>> Send TRNSYS-users mailing list submissions to
>> trnsys-users at cae.wisc.edu
>>
>> To subscribe or unsubscribe via the World Wide Web, visit
>> https://mailman.cae.wisc.edu/listinfo/trnsys-users
>> or, via email, send a message with subject or body 'help' to
>> trnsys-users-request at cae.wisc.edu
>>
>> You can reach the person managing the list at
>> trnsys-users-owner at cae.wisc.edu
>>
>> When replying, please edit your Subject line so it is more specific
>> than "Re: Contents of TRNSYS-users digest..."
>>
>> Today's Topics:
>>
>> 1. Question(solar radiation) (=?EUC-KR?B?udrB2L/4?=)
>> 2. TRNSYS Active Layer Flowrate (Devin Rohan)
>> 3. type 700 efficiencies (Pablo D?az N??ez)
>>
>>
>> ---------- 已转发邮件 ----------
>> From: 박준원<flowrime at naver.com>
>> To: <trnsys-users at cae.wisc.edu>
>> Date: Mon, 13 Jun 2011 20:33:02 +0900
>> Subject: [TRNSYS-users] Question(solar radiation)
>>
>> Hi!!
>>
>> I am a Korean student, i'm having some trouble with solar radiation.
>>
>>
>>
>> I want to get "Indoor solar radiation" using Type56b(Multi zone)...
>>
>>
>>
>> But. I dont know output value about solar radiation..
>>
>>
>>
>> I think, Ntype 73 (zone output) is zone solar radiation, is it right??
>>
>>
>>
>> However i dont know unit of that..
>>
>>
>>
>> So.. My question are..
>>
>>
>>
>> 1. is Ntype 73 zone solar radiation? so what's the unit??
>>
>>
>>
>> 2. if not Ntype 73, How can i get the indoor solar radiation?
>>
>>
>>
>>
>>
>> thanks to all,
>>
>>
>> ---------- 已转发邮件 ----------
>> From: Devin Rohan <dmrohan at gmail.com>
>> To: trnsys-users at cae.wisc.edu
>> Date: Sat, 11 Jun 2011 20:10:01 -0400
>> Subject: [TRNSYS-users] TRNSYS Active Layer Flowrate
>> The Type 56 manual suggests that the specific mass flow rate be greater
>> than 13 kg/h-m^2. Say I wanted to convert this to mass flow rate in kg/s
>> and the fluid was flowing through a 3/8" (or 9.525 mm) inside diameter pipe.
>> Here's what I'm doing...
>>
>> A_pipe= (pi*D^2)/4 = (pi*.009525^2)/4= 7.1256 E-5 m^2
>>
>> 13 kg/h-m^2 x (7.1256 E-5 m^2) x (h / 3600 sec) = 2.573 E-7 kg/s
>>
>> This seems like an awfully low mass flow rate, since what I've seen in
>> literature for floor heating applications is around .05 kg/s. Am I missing
>> something here?
>>
>> --
>> Devin M. Rohan
>> drohan at purdue.edu
>>
>>
>> ---------- 已转发邮件 ----------
>> From: "Pablo Díaz Núñez" <p.diazn87 at gmail.com>
>> To: trnsys-users at cae.wisc.edu
>> Date: Mon, 13 Jun 2011 18:16:34 +0200
>> Subject: [TRNSYS-users] type 700 efficiencies
>> Dear trnsys users,
>>
>> I am simulating and studying the behaviour of a central heating system of
>> a residential building with gas boilers. For the boiler I'm using type 700,
>> where combustion and boiler efficiencies are inputs. I need these values as
>> a function of the intlet water temperature and the part load ratio for the
>> model to work and I don't find this data in any boiler catalog. Only partial
>> data like the boiler efficiency at rated power.
>>
>> If somebody had any cataloge with this data I would be very thankful. Or
>> maybe somebody knows any manufacturer who could provide me.
>>
>> I know it's not a doubt or question about trnsys itself, but I'm a bit
>> desperate.
>>
>> Thanks in advance!
>>
>> _______________________________________________
>> TRNSYS-users mailing list
>> TRNSYS-users at cae.wisc.edu
>> https://mailman.cae.wisc.edu/listinfo/trnsys-users
>>
>>
>
>
> ---------- 已转发邮件 ----------
> From: Adrien JEZEQUEL - ITF <a.jezequel at itf.biz>
> To: trnsys-users at cae.wisc.edu
> Date: Tue, 14 Jun 2011 12:42:47 +0200
> Subject: Re: [TRNSYS-users] type 16
> Dear Wang,
>
> I think TRNSYS examples deal with weather data.
> I suggest you to check examples in your local TRNSYS directory to see how
> to do.
>
> Best regards
> ------------------------------
> [image: www.itf.biz] <http://www.itf.biz>
> www.itf.biz Adrien JEZEQUEL
> Simulations Thermiques Dynamiques *ITF*
> 62, Rue du Bolliet
> 73230 St Alban Leysse
> FRANCE
> Phone :
> Fax :
> Mail:
> +33(0) 479 750 029
> +33(0) 479 852 122
> a.jezequel at itf.biz ou aj at itf.biz *Afin de contribuer au respect de
> l'environnement, merci de n'imprimer cet e-mail que si nécessaire
> Please, consider our environmental responsability before printing this
> email
> *
>
> Le 14/06/2011 11:22, 王洋 a écrit :
>
> Dear all,
>
> I added our institute own weather data into TRNSYS using Type 9.
> But I also want to add the other weather data: Global Radiation into TRNSYS.
> As I knew, I need Type 16 and Type 9. But I don't know detailed setting and
> defination of Type 16. Please give me some advices in details.
> E.g. 1. Which Mode should I select? Mode 2? Because there are
> Global radiation, Outdoor temperature and Humidity and wind speed, wind
> direction and Air pressure in our weather station.
> 2. In details which Inputs and Outputs of Type 16 need I link to
> Type 9 and others?
> 3. How to set and define the Parameter, Input and Output in
> details?
>
> Many thanks!
>
> Br.
>
> wang
>
> 2011/6/13 <trnsys-users-request at cae.wisc.edu>
>
>> Send TRNSYS-users mailing list submissions to
>> trnsys-users at cae.wisc.edu
>>
>> To subscribe or unsubscribe via the World Wide Web, visit
>> https://mailman.cae.wisc.edu/listinfo/trnsys-users
>> or, via email, send a message with subject or body 'help' to
>> trnsys-users-request at cae.wisc.edu
>>
>> You can reach the person managing the list at
>> trnsys-users-owner at cae.wisc.edu
>>
>> When replying, please edit your Subject line so it is more specific
>> than "Re: Contents of TRNSYS-users digest..."
>>
>> Today's Topics:
>>
>> 1. Question(solar radiation) (=?EUC-KR?B?udrB2L/4?=)
>> 2. TRNSYS Active Layer Flowrate (Devin Rohan)
>> 3. type 700 efficiencies (Pablo D?az N??ez)
>>
>>
>> ---------- 已转发邮件 ----------
>> From: 박준원<flowrime at naver.com>
>> To: <trnsys-users at cae.wisc.edu>
>> Date: Mon, 13 Jun 2011 20:33:02 +0900
>> Subject: [TRNSYS-users] Question(solar radiation)
>>
>> Hi!!
>>
>> I am a Korean student, i'm having some trouble with solar radiation.
>>
>>
>>
>> I want to get "Indoor solar radiation" using Type56b(Multi zone)...
>>
>>
>>
>> But. I dont know output value about solar radiation..
>>
>>
>>
>> I think, Ntype 73 (zone output) is zone solar radiation, is it right??
>>
>>
>>
>> However i dont know unit of that..
>>
>>
>>
>> So.. My question are..
>>
>>
>>
>> 1. is Ntype 73 zone solar radiation? so what's the unit??
>>
>>
>>
>> 2. if not Ntype 73, How can i get the indoor solar radiation?
>>
>>
>>
>>
>>
>> thanks to all,
>>
>>
>> ---------- 已转发邮件 ----------
>> From: Devin Rohan <dmrohan at gmail.com>
>> To: trnsys-users at cae.wisc.edu
>> Date: Sat, 11 Jun 2011 20:10:01 -0400
>> Subject: [TRNSYS-users] TRNSYS Active Layer Flowrate
>> The Type 56 manual suggests that the specific mass flow rate be greater
>> than 13 kg/h-m^2. Say I wanted to convert this to mass flow rate in kg/s
>> and the fluid was flowing through a 3/8" (or 9.525 mm) inside diameter pipe.
>> Here's what I'm doing...
>>
>> A_pipe= (pi*D^2)/4 = (pi*.009525^2)/4= 7.1256 E-5 m^2
>>
>> 13 kg/h-m^2 x (7.1256 E-5 m^2) x (h / 3600 sec) = 2.573 E-7
>> kg/s
>>
>> This seems like an awfully low mass flow rate, since what I've seen in
>> literature for floor heating applications is around .05 kg/s. Am I missing
>> something here?
>>
>> --
>> Devin M. Rohan
>> drohan at purdue.edu
>>
>>
>> ---------- 已转发邮件 ----------
>> From: "Pablo Díaz Núñez" <p.diazn87 at gmail.com>
>> To: trnsys-users at cae.wisc.edu
>> Date: Mon, 13 Jun 2011 18:16:34 +0200
>> Subject: [TRNSYS-users] type 700 efficiencies
>> Dear trnsys users,
>>
>> I am simulating and studying the behaviour of a central heating system of
>> a residential building with gas boilers. For the boiler I'm using type 700,
>> where combustion and boiler efficiencies are inputs. I need these values as
>> a function of the intlet water temperature and the part load ratio for the
>> model to work and I don't find this data in any boiler catalog. Only partial
>> data like the boiler efficiency at rated power.
>>
>> If somebody had any cataloge with this data I would be very thankful. Or
>> maybe somebody knows any manufacturer who could provide me.
>>
>> I know it's not a doubt or question about trnsys itself, but I'm a bit
>> desperate.
>>
>> Thanks in advance!
>>
>> _______________________________________________
>> TRNSYS-users mailing list
>> TRNSYS-users at cae.wisc.edu
>> https://mailman.cae.wisc.edu/listinfo/trnsys-users
>>
>>
>
> _______________________________________________
> TRNSYS-users mailing listTRNSYS-users at cae.wisc.eduhttps://mailman.cae.wisc.edu/listinfo/trnsys-users
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110614/ed0bef40/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 17526 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110614/ed0bef40/attachment-0001.jpeg>
More information about the TRNSYS-users
mailing list