[TRNSYS-users] type 16
Adrien JEZEQUEL - ITF
a.jezequel at itf.biz
Tue Jun 14 03:42:47 PDT 2011
Dear Wang,
I think TRNSYS examples deal with weather data.
I suggest you to check examples in your local TRNSYS directory to see
how to do.
Best regards
------------------------------------------------------------------------
www.itf.biz <http://www.itf.biz>
www.itf.biz <http://www.itf.biz>
Adrien JEZEQUEL
Simulations Thermiques Dynamiques
*ITF*
62, Rue du Bolliet
73230 St Alban Leysse
FRANCE
Phone :
Fax :
Mail:
+33(0) 479 750 029
+33(0) 479 852 122
a.jezequel at itf.biz ou aj at itf.biz
/Afin de contribuer au respect de l'environnement, merci de n'imprimer
cet e-mail que si nécessaire
Please, consider our environmental responsability before printing this email
/
Le 14/06/2011 11:22, 王洋 a écrit :
> Dear all,
>
> I added our institute own weather data into TRNSYS using Type
> 9. But I also want to add the other weather data: Global Radiation
> into TRNSYS. As I knew, I need Type 16 and Type 9. But I don't know
> detailed setting and defination of Type 16. Please give me some
> advices in details.
> E.g. 1. Which Mode should I select? Mode 2? Because there are
> Global radiation, Outdoor temperature and Humidity and wind speed,
> wind direction and Air pressure in our weather station.
> 2. In details which Inputs and Outputs of Type 16 need I link
> to Type 9 and others?
> 3. How to set and define the Parameter, Input and Output in
> details?
>
> Many thanks!
>
> Br.
>
> wang
>
> 2011/6/13 <trnsys-users-request at cae.wisc.edu
> <mailto:trnsys-users-request at cae.wisc.edu>>
>
> Send TRNSYS-users mailing list submissions to
> trnsys-users at cae.wisc.edu <mailto:trnsys-users at cae.wisc.edu>
>
> To subscribe or unsubscribe via the World Wide Web, visit
> https://mailman.cae.wisc.edu/listinfo/trnsys-users
> or, via email, send a message with subject or body 'help' to
> trnsys-users-request at cae.wisc.edu
> <mailto:trnsys-users-request at cae.wisc.edu>
>
> You can reach the person managing the list at
> trnsys-users-owner at cae.wisc.edu
> <mailto:trnsys-users-owner at cae.wisc.edu>
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of TRNSYS-users digest..."
>
> Today's Topics:
>
> 1. Question(solar radiation) (=?EUC-KR?B?udrB2L/4?=)
> 2. TRNSYS Active Layer Flowrate (Devin Rohan)
> 3. type 700 efficiencies (Pablo D?az N??ez)
>
>
> ---------- 已转发邮件 ----------
> From: 박준원<flowrime at naver.com <mailto:flowrime at naver.com>>
> To: <trnsys-users at cae.wisc.edu <mailto:trnsys-users at cae.wisc.edu>>
> Date: Mon, 13 Jun 2011 20:33:02 +0900
> Subject: [TRNSYS-users] Question(solar radiation)
>
> Hi!!
>
> I am a Korean student, i'm having some trouble with solar radiation.
>
> I want to get "Indoor solar radiation" using Type56b(Multi zone)...
>
> But. I dont know output value about solar radiation..
>
> I think, Ntype 73 (zone output) is zone solar radiation, is it
> right??
>
> However i dont know unit of that..
>
> So.. My question are..
>
> 1. is Ntype 73 zone solar radiation? so what's the unit??
>
> 2. if not Ntype 73, How can i get the indoor solar radiation?
>
> thanks to all,
>
>
>
> ---------- 已转发邮件 ----------
> From: Devin Rohan <dmrohan at gmail.com <mailto:dmrohan at gmail.com>>
> To: trnsys-users at cae.wisc.edu <mailto:trnsys-users at cae.wisc.edu>
> Date: Sat, 11 Jun 2011 20:10:01 -0400
> Subject: [TRNSYS-users] TRNSYS Active Layer Flowrate
> The Type 56 manual suggests that the specific mass flow rate be
> greater than 13 kg/h-m^2. Say I wanted to convert this to mass
> flow rate in kg/s and the fluid was flowing through a 3/8" (or
> 9.525 mm) inside diameter pipe. Here's what I'm doing...
>
> A_pipe= (pi*D^2)/4 = (pi*.009525^2)/4= 7.1256 E-5 m^2
>
> 13 kg/h-m^2 x (7.1256 E-5 m^2) x (h / 3600 sec) = 2.573
> E-7 kg/s
>
> This seems like an awfully low mass flow rate, since what I've
> seen in literature for floor heating applications is around .05
> kg/s. Am I missing something here?
>
> --
> Devin M. Rohan
> drohan at purdue.edu <mailto:drohan at purdue.edu>
>
>
> ---------- 已转发邮件 ----------
> From: "Pablo Díaz Núñez" <p.diazn87 at gmail.com
> <mailto:p.diazn87 at gmail.com>>
> To: trnsys-users at cae.wisc.edu <mailto:trnsys-users at cae.wisc.edu>
> Date: Mon, 13 Jun 2011 18:16:34 +0200
> Subject: [TRNSYS-users] type 700 efficiencies
> Dear trnsys users,
> I am simulating and studying the behaviour of a central heating
> system of a residential building with gas boilers. For the boiler
> I'm using type 700, where combustion and boiler efficiencies are
> inputs. I need these values as a function of the intlet water
> temperature and the part load ratio for the model to work and I
> don't find this data in any boiler catalog. Only partial data like
> the boiler efficiency at rated power.
> If somebody had any cataloge with this data I would be very
> thankful. Or maybe somebody knows any manufacturer who could
> provide me.
> I know it's not a doubt or question about trnsys itself, but I'm a
> bit desperate.
> Thanks in advance!
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu <mailto:TRNSYS-users at cae.wisc.edu>
> https://mailman.cae.wisc.edu/listinfo/trnsys-users
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110614/fcf5291d/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: logo_itf_2010.jpg
Type: image/jpeg
Size: 17526 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110614/fcf5291d/attachment-0001.jpg>
More information about the TRNSYS-users
mailing list