[TRNSYS-users] Problem simulating evaporative cooling

[Ricardo Gallegos]

Dear all,
I am simulating a simple system consisting of an evaporative cooler
connected to a house, but the humidity ratio of the outlet air from the
cooler is the same than that inside the house. This does not make much sense
to me for as I see the situation  the air from the cooler mixes with the air
inside the house ( at a differnet humidity ratio) and as a result the
humidity ratio should be different. Temperatures of the air from the cooler
and inside the house
are, as expected, different. Is this a problem in how the Type 65a
models the exchange of air, or there is something I am not
considering?
Regards and thanks for any advice on this.
I attach my studio file as well as my Building and weather files.
Ricardo Gallegos
Universidad Autonoma de Baja California.
Mexicali, Mexico
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20080407/3706b1d3/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: MX_MexicaliSMN.tm2
Type: application/octet-stream
Size: 1261497 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20080407/3706b1d3/attachment-0003.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Singlehouseeavportivecooling.TPF
Type: application/octet-stream
Size: 124021 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20080407/3706b1d3/attachment-0004.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Valle del Pedregal1.bui
Type: application/octet-stream
Size: 23567 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20080407/3706b1d3/attachment-0005.obj>