Dear all,<br>I am simulating a simple system consisting of an evaporative cooler connected to a house, but the humidity ratio of the outlet air from the cooler is the same than that inside the house. This does not make much sense to me for as I see the situation  the air from the cooler mixes with the air inside the house ( at a differnet humidity ratio) and as a result the humidity ratio should be different. Temperatures of the air from the cooler and inside the house are, as expected, different. Is this a problem in how the Type 65a models the exchange of air, or there is something I am not considering?<br>
 Regards and thanks for any advice on this.<br>I attach my studio file as well as my Building and weather files.<br>Ricardo Gallegos<br>Universidad Autonoma de Baja California.<br>Mexicali, Mexico<br>