[TRNSYS-users] Problem simulating evaporative cooling

[Technical Support]

Ricardo,
  I don't think that there is anything wrong with your simulation. There is a slight difference in the humidity ratio of your supply air and your zone, which you can see if you change the scale on the plot. I think the reason that they are so close is that you are supplying quite a bit of air to the house (26 air changes per hour). If you reduce the air flow through the evaporative cooler, you will see the difference between the supply air humidity ratio and the house humidity ratio increase.
Kind regards,
 David





Technical Support TeamThermal Energy System Specialists, LLC2916 Marketplace Dr, Suite 104Madison, WI 53719techsupport at tess-inc.com

----- Original Message -----

Subject: [TRNSYS-users] Problem simulating evaporative cooling

From: "Ricardo Gallegos" >;ricardogallegoso at gmail.com>

Date: Mon, April 7, 2008 11:20




Dear all,I am simulating a simple system consisting of an evaporative cooler connected to a house, but the humidity ratio of the outlet air from the cooler is the same than that inside the house. This does not make much sense to me for as I see the situation  the air from the cooler mixes with the air inside the house ( at a differnet humidity ratio) and as a result the humidity ratio should be different. Temperatures of the air from the cooler and inside the house are, as expected, different. Is this a problem in how the Type 65a models the exchange of air, or there is something I am not considering? Regards and thanks for any advice on this.I attach my studio file as well as my Building and weather files.Ricardo GallegosUniversidad Autonoma de Baja California.Mexicali, Mexico

_______________________________________________TRNSYS-users mailing listTRNSYS-users at engr.wisc.edu
https://www.cae.wisc.edu/mailman/listinfo/trnsys-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20080407/b53bb0c3/attachment-0001.htm>