[TRNSYS-users] trnViewBUI distorted building model

[Cem Kalkan]

Hi All,

I created a 3D building model(see attached) using the TRNSYS 3D plugin on Sketchup. I imported the .idf file into the TRNBuild. After that, I checked the surfaces in the GUI, and I couldn't find any problems. However, when I checked the 3D building model in the trnViewBUI extension, the model was highly distorted(see attached). I am not sure if there was an error in the .idf file or the TRNViewBUI extension. Has anyone encountered a problem like this before?

Regards,

Cem



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20220510/9643cbcf/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Final.idf
Type: application/octet-stream
Size: 51466 bytes
Desc: Final.idf
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20220510/9643cbcf/attachment-0001.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: TRNViewBUI.jpg
Type: image/jpeg
Size: 102753 bytes
Desc: TRNViewBUI.jpg
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20220510/9643cbcf/attachment-0002.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: SketchUp-TRNSYS3D.jpg
Type: image/jpeg
Size: 211033 bytes
Desc: SketchUp-TRNSYS3D.jpg
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20220510/9643cbcf/attachment-0003.jpg>