[TRNSYS-users] Automatically splitting surface of thermal zone

[Maja Danovska]

Dear Users,

How is it possible to make Sketchup (w\ Trnsys3D plugin) to automatically
split a surface into subsurfaces according to how many adjacent thermal
zones there are? I attached a picture to better understand the problem. In
this situation now I have only one ceiling of the thermal zone below but I
want to be 2becasue the thermal zone above doesn't fit the exact area of
the one below.

[image: image.png]
-- 
*Maja Danovska*

Research Fellow
Dep. of Civil, Environmental and Mechanical Engineering
University of Trento
via Mesiano, 77 - 38123 - Trento - ITALY

maja.danovska at unitn.it
+393403391289
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20220322/e54e99ee/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 64268 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20220322/e54e99ee/attachment-0002.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Capture.PNG
Type: image/png
Size: 52736 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20220322/e54e99ee/attachment-0003.png>