[TRNSYS-users] zonal model

[Huijie Pu]

Hello！


I divided a large space into nine areas, i.e. in TRNBuild, one zone with nine airnodes, but the output NTYPES33-SQCOOL value of the model is always higher than the output NTYPES31-QCOOL value of the full large space model, but according to the actual , the two values should be the same. Both models have the same settings, neither have any gains set, and the weather files are the same. I don't understand what is causing this?
The figure below is the difference between the SQCOOL value and the QCOOL value obtained from the simulation from July 23 to July 26.


kind regards,
Pu
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20220629/92988aa4/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 38832 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20220629/92988aa4/attachment-0001.png>