<div style="line-height:1.7;color:#000000;font-size:14px;font-family:Arial"><div style="margin:0;">HelloŁĄ</div><div style="margin:0;"><div style="margin:0;"><br></div><div style="margin:0;">I divided a large space into nine areas, i.e. in TRNBuild, one zone with nine airnodes, but the output NTYPES33-SQCOOL value of the model is always higher than the output NTYPES31-QCOOL value of the full large space model, but according to the actual , the two values should be the same. Both models have the same settings, neither have any gains set, and the weather files are the same. I don't understand what is causing this?</div><div style="margin:0;">The figure below is the difference between the SQCOOL value and the QCOOL value obtained from the simulation from July 23 to July 26.</div><div style="margin:0;"><br></div><div style="margin:0;">kind regards,</div><div style="margin:0;">Pu</div><div style="margin:0;"><img src="cid:11c9232f$1$181aea8df0c$Coremail$huijiepu$163.com" orgwidth="1188" orgheight="818" data-image="1" style="width: 639px; height: 439px;"></div></div></div>