[TRNSYS-users] Locking variables in new proforma

[David BRADLEY]

Doris,

  When you create the proforma for your components you can lock the 
parameter values by clicking on the lock icon next to each one. In this 
case the parameter value will be locked by default when the user adds 
the component to the project but will be able to unlock the parameter if 
they want. If, when you are creating your proforma you set the min, max, 
and default values of a parameter all to the same number then this will 
effectively lock the parameter completely such that the user will not be 
able to unlock it.

kind regards,

  David


On 08/18/2022 17:14, dg.buck--- via TRNSYS-users wrote:
>
> Dear TRNSYS users,
>
> for some of my new TRNSYS components I want to lock some variables in 
> the proforma. I want these variables to be locked when the user first 
> places the proforma on the assembly panel. In the manuals I can‘t find 
> the information on how to achieve this.
>
> As to illustrate what I mean: The different variants oft the types 65 
> and 25 all have two locked parameters. The parameter for the logical 
> unit of the output file is locked, but may be unlocked by the user. 
> However, the user cannot unlock the parameter for the units printing mode.
>
> How can I achieve this or find instructions on how to do this?
>
> Thanks in advance.
>
> Doris Buck
>
> 
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy System Specialists, LLC
3 North Pinckney Street - suite 202
Madison, WI  53703 USA

P:+1.608.274.2577
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20220819/3db9d697/attachment.htm>