[TRNSYS-users] Type errors

[David BRADLEY]

Manfred,

   Can you please tell me which version of Trnsys you are using? You can 
find out by opening the file .\TrnsysXX\trnsys.ini with a text editor. 
The behavior that you report is very similar to some rare error messages 
that we used to receive and that we (thought we had) fixed with the 
18.02.0000 release. If you are using an earlier version I would suggest 
contacting your distributor for an update. If you are using a more 
recent version then please send me the project and files needed in order 
to run it and I'll see if I can find out what is going on.

kind regards,

  David


On 10/04/2021 06:42, Manfred Schindler via TRNSYS-users wrote:
>
> Hey Trnsys-Community,
>
> on the basis of a working model, I extended the model to a finer zone 
> definition, from 15 to 45 zones. In my dck file I have a view unites 
> which are existing for every zone discrete, using type 2. Then I had 
> to increase the maximum number of equations, because the default 
> number was exceeded by my simulation.
>
> When running the simulation I get for all the type 2 units the same 
> error, also for the ones, which were working in my functioning 
> 15-zone-simulation:
>
> I don’t even now, what the message text really says – is it now about 
> the output value or the number of outputs….
>
> The second error I get a lot, especially for the units 46 and 31, is 
> the following:
>
> *** Fatal Error at time   :         0.000000
>
>     Generated by Unit     :   430
>
>     Generated by Type     :    31
>
>     TRNSYS Message    468 : The getStaticArrayValue function was 
> called with an index greater than that specified for the total number 
> of dynamic variables in the SetNumberStoredVariables subroutine call. 
> Please check the formulation of the specified TYPE, rebuild the 
> dynamic link library and re-run the simulation.
>
>     Reported information  : Not available
>
> Can somebody help me solving the problem? For me it seems that there 
> is one error prior to my mentioned errors
>
> Thanks in advance!
>
> Regards,
>
> Manfred Schindler
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
3 North Pinckney Street - suite 202
Madison, WI  53703 USA

P:+1.608.274.2577
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20211004/58ede5f6/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image003.png
Type: image/png
Size: 6348 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20211004/58ede5f6/attachment-0002.png>