[TRNSYS-users] A Question about Type 56 that I want to post in TRNSYS-users

[hotline]

Dear Aoye,

for the generation of radiance files, the filepath of your simulation must not contain any blanks. If you remove the blanks from your filepath, the generation should work.

Best regards,
Christina

__________________________________________________________________________________________________


Transsolar KlimaEngineering

Stuttgart  | München | Paris | New York


https://www.trnsys.de<https://www.trnsys.de/>
https://transsolar.com/de

<https://www.trnsys.de>


Transsolar Energietechnik GmbH | Curiestraße 2 | 70563 Stuttgart

Geschäftsführer: Matthias Schuler, Thomas Auer, Stefan Holst, Dieter Schnelle

Registered at Amtsgericht Stuttgart HRB 23347 | USt-IdNr.: DE 152272639

The simulation project you have sent will be stored on the local servers of Transsolar Energietechnik GmbH for the duration of the project support. Our employees are obliged by us to confidentiality. After this period, all project-related data is deleted.

The storage of your personal e-mail and other contact information is based on the mutual interest in the execution of this traffic and on a mutual business contact. If you have any questions, please contact our data protection officer at privacy at transsolar.com<mailto:privacy at transsolar.com>. Our privacy policy can be found here<http://www.trnsys.de/docs/userservice/userservice_dataprivacy_en.htm>.
________________________________
Von: TRNSYS-users <trnsys-users-bounces at lists.onebuilding.org> im Auftrag von Song Aoye via TRNSYS-users <trnsys-users at lists.onebuilding.org>
Gesendet: Freitag, 3. Dezember 2021 08:07
An: trnsys-users at lists.onebuilding.org <trnsys-users at lists.onebuilding.org>
Cc: Song Aoye <soymail at pku.edu.cn>
Betreff: [TRNSYS-users] A Question about Type 56 that I want to post in TRNSYS-users


Dear sir or madam,


Thank you very much for checking my email. I met a problem while learning to use TRNSYS. I would like to ask everyone who uses the software for advice. The problem is as follows:


Dear everyone,

When I was learning through 09-tutorial.pdf, I met a problem about type56.

On page 83, the tutorial asked me to generate a radiance file, but when I clicked on generate, an error appeared, which prevented me from outputting the results. The error displayed as "open of'D:\TRNSYS/skyPatches.rad' for output failed: No such file or directory". I cannot understand what file this skyPatches.rad is? Can someone tell me please?

Yours,
Aoye SONG


Here is the problem I met. If it can be posted on trnsys-users, I would be very grateful!


Best Regards,

Aoye SONG

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20211203/def88d54/attachment.htm>