[TRNSYS-users] Simulation stop

Jeff Thornton thornton at tess-inc.com
Thu Apr 2 08:20:22 PDT 2020


Parth,

Usually the message about the controller being stuck is simply a warning written at the end of the simulation.  Can you check the list file that was generated and look for the message that starts with  “Error”.  I’m guessing it’s a non-convergence error but let us know what it is so we can provide better help.  Are you using small timesteps ;1-3 minutes, have included pipes for thermal mass, and checked your loops for flow continuity?

Jeff - TESS

Sent from my iPhone

> On Apr 2, 2020, at 8:08 AM, parth prajapati via TRNSYS-users <trnsys-users at lists.onebuilding.org> wrote:
> 
> 
> Hy,
>  I am working with solar water heater for domestic hot water purposes. I have set simulation time for one year but analysis stops at 1344 hr. In error it says that controller stuck. Please help me on this.
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org



More information about the TRNSYS-users mailing list