[TRNSYS-users] Invalid floating point

[mohamed sarmouk]

Dear All,
i'm using type 1231 and a pump type 114 in a heating system with type 56.
i keep having an error "Invalid floating point" and the simulation stops.
But if i reduce the rated flow rate (Which is not the aim of the study) on
type 114 it works a little bit longer and then stops.
And no error is indicated in the list file.
You will find attached my project files maybe you could help me find the
source of the problem.
Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20200402/682db0aa/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Troyes.b18
Type: application/octet-stream
Size: 25010 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20200402/682db0aa/attachment-0003.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: troyes_imported.tpf
Type: application/octet-stream
Size: 200633 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20200402/682db0aa/attachment-0004.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: troyes.idf
Type: application/octet-stream
Size: 35101 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20200402/682db0aa/attachment-0005.obj>