[TRNSYS-users] Simulation stop

[parth prajapati]

Thanks for the tip!

On Fri, 3 Apr 2020 at 1:48 am, David BRADLEY <d.bradley at tess-inc.com> wrote:

> It is not uncommon for a controller to stick. That in and of itself is not
> a TRNSYS error; just a warning. If your simulation is not converging at a
> lot of time steps then you will receive a lot of warnings about non
> convergence and if it happens enough then you'll get a fatal error. Look in
> the error log and filter out all the notices and warnings so that you are
> just looking at errors. The errors are the ones that you need to concern
> yourself with.
>
> If you are unable to find the cause of the error then you should contact
> your distributor and get help from their hotline.
>
> kind regards,
>
>  David
>
>
> On 04/02/2020 01:35, parth prajapati via TRNSYS-users wrote:
>
> Hy,
>  I am working with solar water heater for domestic hot water purposes. I
> have set simulation time for one year but analysis stops at 1344 hr. In
> error it says that controller stuck. Please help me on this.
>
> _______________________________________________
> TRNSYS-users mailing listTRNSYS-users at lists.onebuilding.orghttp://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>
> --
> ***************************
> David BRADLEY
> Principal
> Thermal Energy Systems Specialists, LLC3 North Pinckney Street - suite 202
> Madison, WI  53703 USA <https://www.google.com/maps/search/3+North+Pinckney+Street+-+suite+202%0D%0AMadison,+WI++53703+USA?entry=gmail&source=g>
>
> P:+1.608.274.2577
> F:+1.608.278.1475d.bradley at tess-inc.com
> http://www.tess-inc.comhttp://www.trnsys.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20200403/c8da1555/attachment.htm>