[TRNSYS-users] TRNSYS-EES coupling error

[Hemmatabady, Hoofar]

Hi David,


No, I could not find a solution yet.


Best regards,

Hoofar


________________________________
Von: TRNSYS-users <trnsys-users-bounces at lists.onebuilding.org> im Auftrag von David BRADLEY via TRNSYS-users <trnsys-users at lists.onebuilding.org>
Gesendet: Montag, 1. April 2019 19:04:48
An: Hemmatabady, Hoofar via TRNSYS-users
Cc: David BRADLEY
Betreff: Re: [TRNSYS-users] TRNSYS-EES coupling error


Hoofar,

  Did you find a solution to this problem? I am just back from a week out of town and I don't see a response.

regards,

 David


On 03/22/2019 04:48, Hemmatabady, Hoofar via TRNSYS-users wrote:
Dear TRNSYS users,

I am coupling TRNSYS with EES. EES is installed in (C:\Program Files (x86) \EES32). After I changed the location of EES in type 66a, got the following error:

"TRNSYS Message 48 : The TRNSYS processor has reported that an > unrecognized control card was found while trying to read the input > file. This error can be caused by underspecifying a required number of > items in the input file. For example, specifying only 9 parameters > after a "PARAMETERS 10" card has been read can cause this error. The > line that caused this error is listed in the reported information > below. Reported information: compressor.ees

When I run the same example in another computer, which has EES installed in (C:\EES32), it works. I found that labels with spaces are not allowed in TRNSYS ((Program Files (x86) is read by TRNSYS as Program files because of the space between Program files and (x86)!!). As I cannot change the location of EES in my main server, I tried to solve the problem by adding double-quote “C:\Program Files (x86) \EES32”or single-quote ‘C:\Program Files (x86) \EES32’ but I got the following error again:

The EES program was not found at the specified location.

How can I solve this problem?

Best regards,
Hoofar





_______________________________________________
TRNSYS-users mailing list
TRNSYS-users at lists.onebuilding.org<mailto:TRNSYS-users at lists.onebuilding.org>
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org


--
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
3 North Pinckney Street - suite 202
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com<mailto:d.bradley at tess-inc.com>

http://www.tess-inc.com
http://www.trnsys.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20190402/f8948a49/attachment.htm>