[TRNSYS-users] TRNSYS-EES coupling error

[David BRADLEY]

Hoofar,

   Did you find a solution to this problem? I am just back from a week 
out of town and I don't see a response.

regards,

  David


On 03/22/2019 04:48, Hemmatabady, Hoofar via TRNSYS-users wrote:
>
> Dear TRNSYS users,
>
> I am coupling TRNSYS with EES. EES is installed in (C:\Program Files 
> (x86) \EES32). After I changed the location of EES in type 66a, got 
> the following error:
>
> /"TRNSYS Message 48 : The TRNSYS processor has reported that an 
> />/unrecognized control card was found while trying to read the input 
> />/file. This error can be caused by underspecifying a required number 
> of / >/items in the input file. For example, specifying only 9 
> parameters />/after a "PARAMETERS 10" card has been read can cause 
> this error. The />/line that caused this error is listed in the 
> reported information />/below. //Reported information: compressor.ees/
>
> //
>
> When I run the same example in another computer, which has EES 
> installed in (C:\EES32), it works. I found that labels with spaces are 
> not allowed in TRNSYS ((_Program Files (x86)_ is read by TRNSYS as 
> _Program files_ because of the space between _Program files and 
> (x86)_!!). As I cannot change the location of EES in my main server, I 
> tried to solve the problem by adding double-quote “C:\Program Files 
> (x86) \EES32”or single-quote ‘C:\Program Files (x86) \EES32’ but I got 
> the following error again:
>
> /The EES program was not found at the specified location//. /
>
> //
>
> How can I solve this problem?
>
> Best regards,
>
> Hoofar
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
3 North Pinckney Street - suite 202
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20190401/3c45d20a/attachment.html>