[TRNSYS-users] perpendicular links

[David BRADLEY]

Karol,

  I seem to recall having this happen to me once too and that it was 
solved by closing down the Studio and reopening it. As far as I know 
there is no setting that you can switch to default to direct links or 
orthogonal links.

David


On 04/10/2019 03:13, Karol BANDURSKI via TRNSYS-users wrote:
> Dear All,
>
> Just simple issue. I would like to have perpendicular bends in links between
> types in my Simulation Studio model, but last time every link which I have
> created is direct, straight between types.
>
> How can I change it?
>
> Regards,
> Karol
> --------------------------------------------------------------------
> Karol BANDURSKI M. Sc.
> Faculty of Civil and Environemntal Engeneering
> Division of Heating, Air Conditioning and Air Protection
> Poznan University of Technology
> www.put.poznan.pl/~karol. bandurski
> https://www.researchgate.net/profile/Karol_Bandurski
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>
-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
3 North Pinckney Street - suite 202
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20190410/129ec136/attachment.html>