[TRNSYS-users] perpendicular links

[Angel Carrera]

Hi all,

I think that there is such setting, right-clicking on the connection and
choosing "user-defined style", or something similar. In some cases,
although that option is deactivated, the lines start to behave like if it
was activated (i got the feeling that happens only in dense .tpfs).
To solve it, I activate/deactivate that setting and the links become
perpendicular again. Regards

Angel

El mié., 10 abr. 2019 16:56, David BRADLEY via TRNSYS-users <
trnsys-users at lists.onebuilding.org> escribió:

> Karol,
>
>  I seem to recall having this happen to me once too and that it was solved
> by closing down the Studio and reopening it. As far as I know there is no
> setting that you can switch to default to direct links or orthogonal links.
>
> David
>
>
> On 04/10/2019 03:13, Karol BANDURSKI via TRNSYS-users wrote:
>
> Dear All,
>
> Just simple issue. I would like to have perpendicular bends in links between
> types in my Simulation Studio model, but last time every link which I have
> created is direct, straight between types.
>
> How can I change it?
>
> Regards,
> Karol
> --------------------------------------------------------------------
> Karol BANDURSKI M. Sc.
> Faculty of Civil and Environemntal Engeneering
> Division of Heating, Air Conditioning and Air Protection
> Poznan University of Technologywww.put.poznan.pl/~karol. bandurskihttps://www.researchgate.net/profile/Karol_Bandurski
>
>
>
> _______________________________________________
> TRNSYS-users mailing listTRNSYS-users at lists.onebuilding.orghttp://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>
> --
> ***************************
> David BRADLEY
> Principal
> Thermal Energy Systems Specialists, LLC
> 3 North Pinckney Street - suite 202
> Madison, WI  53703 USA
>
> P:+1.608.274.2577
> F:+1.608.278.1475d.bradley at tess-inc.com
> http://www.tess-inc.comhttp://www.trnsys.com
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20190410/20a17e03/attachment.html>