[TRNSYS-users] perpendicular links

[SENTHIL KUMAR, gokula [Student]]

Hello Karol


First, select the connection, use the right-click button and then select 'User-defined path' option. After, you can drag the connection to make whatever the way you want.


Actually, the easiest way is, don't need to right click and select 'User-defined path' option. Simply drag the straight connection to your preferable direction, it will become perpendicular.


Best Regards

Gokula


________________________________
From: TRNSYS-users <trnsys-users-bounces at lists.onebuilding.org> on behalf of Karol BANDURSKI via TRNSYS-users <trnsys-users at lists.onebuilding.org>
Sent: Wednesday, April 10, 2019 4:13 PM
To: trnsys-users at lists.onebuilding.org
Cc: Karol BANDURSKI
Subject: [TRNSYS-users] perpendicular links

Dear All,

Just simple issue. I would like to have perpendicular bends in links between
types in my Simulation Studio model, but last time every link which I have
created is direct, straight between types.

How can I change it?

Regards,
Karol
--------------------------------------------------------------------
Karol BANDURSKI M. Sc.
Faculty of Civil and Environemntal Engeneering
Division of Heating, Air Conditioning and Air Protection
Poznan University of Technology
www.put.poznan.pl/~karol<http://www.put.poznan.pl/~karol>. bandurski
https://www.researchgate.net/profile/Karol_Bandurski



_______________________________________________
TRNSYS-users mailing list
TRNSYS-users at lists.onebuilding.org
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
[http://mlm.polyu.edu.hk/PolyU_Email_Signature.jpg]

Disclaimer:

This message (including any attachments) contains confidential information intended for a specific individual and purpose. If you are not the intended recipient, you should delete this message and notify the sender and The Hong Kong Polytechnic University (the University) immediately. Any disclosure, copying, or distribution of this message, or the taking of any action based on it, is strictly prohibited and may be unlawful.

The University specifically denies any responsibility for the accuracy or quality of information obtained through University E-mail Facilities. Any views and opinions expressed are only those of the author(s) and do not necessarily represent those of the University and the University accepts no liability whatsoever for any losses or damages incurred or caused to any party as a result of the use of such information.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20190410/891b6990/attachment.html>