[TRNSYS-users] R: I: strange output with type 927

chiara pinto chiara-pinto at hotmail.com
Fri Jun 15 02:46:46 PDT 2018


Thank you so much Jeff

Inviato da Posta<https://go.microsoft.com/fwlink/?LinkId=550986> per Windows 10


________________________________
Da: TRNSYS-users <trnsys-users-bounces at lists.onebuilding.org> per conto di Jeff Thornton via TRNSYS-users <trnsys-users at lists.onebuilding.org>
Inviato: Thursday, June 14, 2018 5:49:12 PM
A: trnsys-users at lists.onebuilding.org
Cc: Jeff Thornton
Oggetto: Re: [TRNSYS-users] I: strange output with type 927


Chiara,

You have the number of heat pumps on (an input) set to a constant value of zero....  In the future, please send the project file as the list file is much more difficult to interpret.



Jeff



---
Jeff Thornton
President - TESS LLC
22 N. Carroll Street, Madison WI USA 53703
Office: (608) 274-2577  Fax: (608) 278-1475
www.tess-inc.com
E-Mail: thornton at tess-inc.com


On 06/14/2018 9:40 am, chiara pinto via TRNSYS-users wrote:

Hi everyone,
i’m using type 927 to simulate a water to water heat pump.
I wrote the external file and it works quite good with my first dataset but not with my second. When i run the simulation the the ouput for power, heat from source and heat lo load are equals to zero. The output for the temperatures and flowrates seems to be good.
What could possibly be the problem? Can anyone help me? I attached the file.lst
Best Regards,
Chiara




_______________________________________________
TRNSYS-users mailing list
TRNSYS-users at lists.onebuilding.org<mailto:TRNSYS-users at lists.onebuilding.org>
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20180615/edb1f9ba/attachment.htm>


More information about the TRNSYS-users mailing list