[TRNSYS-users] I: strange output with type 927

[Jeff Thornton]

Chiara, 

You have the number of heat pumps on (an input) set to a constant value
of zero.... In the future, please send the project file as the list file
is much more difficult to interpret. 

Jeff 

---
Jeff Thornton
President - TESS LLC
22 N. Carroll Street, Madison WI USA 53703
Office: (608) 274-2577 Fax: (608) 278-1475
www.tess-inc.com
E-Mail: thornton at tess-inc.com

On 06/14/2018 9:40 am, chiara pinto via TRNSYS-users wrote: 

> Hi everyone, 
> 
> i'm using type 927 to simulate a water to water heat pump. 
> 
> I wrote the external file and it works quite good with my first dataset but not with my second. When i run the simulation the the ouput for power, heat from source and heat lo load are equals to zero. The output for the temperatures and flowrates seems to be good. 
> 
> What could possibly be the problem? Can anyone help me? I attached the file.lst 
> 
> Best Regards, 
> 
> Chiara 
> 
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org [1]
 

Links:
------
[1]
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20180614/8db36c82/attachment.htm>