[TRNSYS-users] Outlet Temperature of Type 630 (Air Compressor)

[Jeff Thornton]

Arjun, 

I just ran a simple example that provides a sinusoidal temperature inlet
to Type 630 and got a sinusoidal outlet temperature (Trnsys v17.2). See
attached. Check your equations to make sure you set them correctly. If
you are convinced you have it right, plot the inlet and outlet
temperatures and send your project to your distributor. Which version
are you using? 

Jeff 

---
Jeff Thornton
President - TESS LLC
22 N. Carroll Street, Madison WI USA 53703
Office: (608) 274-2577 Fax: (608) 278-1475
www.tess-inc.com
E-Mail: thornton at tess-inc.com

On 02/15/2018 4:02 am, Arjun Vyas via TRNSYS-users wrote: 

> Dear All, 
> 
> I am not able to get the variation of outlet temperature from Type 630 Air Compressor, however I have supplied the ambient temperature of my location as input to the Type 630 using Type 15-6 weather input file. 
> 
> I am getting the same temperature after the compression of air. This is technically not correct. Please can anyone help me to resolve the problem.?? 
> 
> Please find the screenshot of my Trnsys project. 
> 
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org [1]
 

Links:
------
[1]
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20180215/6f3ebd56/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Compressor.jpg
Type: image/jpeg
Size: 229461 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20180215/6f3ebd56/attachment-0002.jpg>