[TRNSYS-users] I: different results with data reader

[chiara pinto]

Inviato da Posta<https://go.microsoft.com/fwlink/?LinkId=550986> per Windows 10

Da: chiara pinto via TRNSYS-users<mailto:trnsys-users at lists.onebuilding.org>
Inviato: giovedì 1 febbraio 2018 12:53
A: trnsys-users at lists.onebuilding.org<mailto:trnsys-users at lists.onebuilding.org>
Cc: chiara pinto<mailto:chiara-pinto at hotmail.com>
Oggetto: [TRNSYS-users] different results with data reader


Hi everyone,

i have some problems with type 9e. I want to make a comparison between two thermal powers, calculated using the same starting data (istantaneous values) but in different ways. One of the Thermal powers has been determineted on Excel and then imported on trnsys (type 9e) and collegates with online plotter. For the other one, i have inserted a new equation on trnsys where both the inputs that the formula are the same as the previous case. Essentially the only differencech is the program that i use to calculate each of them.

But, when i run the simulation, i see that there are different values. How is this possible? Does anyone know what could be the problem? I use mode 2 for data Readers and i chose to interpolate the data.  Could be this the problem?

Thanks a lot for the attention.

Regards,
Chiara

Inviato da Posta<https://go.microsoft.com/fwlink/?LinkId=550986> per Windows 10


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20180205/39f3f54e/attachment.htm>
-------------- next part --------------
_______________________________________________
TRNSYS-users mailing list
TRNSYS-users at lists.onebuilding.org
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org