[TRNSYS-users] different results with data reader

chiara pinto chiara-pinto at hotmail.com
Thu Feb 1 03:53:39 PST 2018


Hi everyone,

i have some problems with type 9e. I want to make a comparison between two thermal powers, calculated using the same starting data (istantaneous values) but in different ways. One of the Thermal powers has been determineted on Excel and then imported on trnsys (type 9e) and collegates with online plotter. For the other one, i have inserted a new equation on trnsys where both the inputs that the formula are the same as the previous case. Essentially the only differencech is the program that i use to calculate each of them.

But, when i run the simulation, i see that there are different values. How is this possible? Does anyone know what could be the problem? I use mode 2 for data Readers and i chose to interpolate the data.  Could be this the problem?


Inviato da Posta<https://go.microsoft.com/fwlink/?LinkId=550986> per Windows 10

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20180201/8cba7a8c/attachment.html>


More information about the TRNSYS-users mailing list