[TRNSYS-users] detailed model for view factors

[leen peeters]

Hi all,



We are using TRNsys to simulate the effect of several measures on the heat
consumption of a residential building. One of those measures is the use of
low emissivity painting on the inner side of external walls.



Wanting to adjust the longwave emission coefficient, it is noted that the
inside userdefined emissivities of surfaces can only be handled by the
detailed model. In the menu of the radiation modes of the thermal zones
however, this detailed model cannot be checked.



Any ideas on how to overcome this obstacle?





Kind regards,

Leen
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20180221/4436361b/attachment.html>