[TRNSYS-users] detailed model for view factors

Marion Hiller Hiller at Transsolar.com
Wed Feb 21 23:43:23 PST 2018


Hi Leen,

you need 3D data for calculating view factors.
I assume that you project doesn’t have this data and thus the geometry mode “geomode” is set to manual or mixed.

Kind regards,

Marion


Von: TRNSYS-users [mailto:trnsys-users-bounces at lists.onebuilding.org] Im Auftrag von leen peeters via TRNSYS-users
Gesendet: Mittwoch, 21. Februar 2018 16:07
An: TRNSYS users mailing list at OneBuilding.org <trnsys-users at lists.onebuilding.org>
Cc: leen peeters <l.f.r.peeters at gmail.com>
Betreff: [TRNSYS-users] detailed model for view factors

Hi all,

We are using TRNsys to simulate the effect of several measures on the heat consumption of a residential building. One of those measures is the use of low emissivity painting on the inner side of external walls.

Wanting to adjust the longwave emission coefficient, it is noted that the inside userdefined emissivities of surfaces can only be handled by the detailed model. In the menu of the radiation modes of the thermal zones however, this detailed model cannot be checked.

Any ideas on how to overcome this obstacle?


Kind regards,
Leen


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20180222/840cd481/attachment.htm>


More information about the TRNSYS-users mailing list