[TRNSYS-users] Canadian well / Puits canadien

[David BRADLEY via TRNSYS-users]

Ismail,

  Are you trying to simulate an open loop or a closed loop system? If 
you are looking at a closed system then Type557 in the TESS GHP library 
is very well validated and not too much trouble to use.

kind regards,

  David



On 08/25/2017 04:39, Ismail OUHALLOU via TRNSYS-users wrote:
> Dear Trnsys experts,
>
> I wonder if anyone would happen to have experience simulating the 
> canadian well in Trnsys (in French Puits canadien) ? For those whom 
> not familiar with it, the following article describes it: 
> http://www.tectonica-online.com/products/2310/conditioning_air_ventilation_canadian/
>
> Thanks in advance.
>
> Best,
> Ismail
>
>
> -- 
> /************************************************/
> /Ismail OUHALLOU/
> Green building & Sustainability consultant
>
> *Morocco*
>
> i.ouhallou at trusted-energy.com <mailto:i.ouhallou at trusted-energy.com>
> issmail.ouhallou at gmail.com <mailto:issmail.ouhallou at gmail.com>
>
>
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20170825/8a8e6f35/attachment-0001.htm>