[TRNSYS-users] Type 16 (radiation processor)

[adnan rasheed via TRNSYS-users]

Thank you very much Jaff for answering me. To solve a little more
confusion, i need your kind attention. As I want to apply radiation data on
my

 building by connecting TYPE 16 with TYPE 56 and gives there all the
surface orientations. In a TYPE 56 there is no input to connect with solar

radiation. If I add new inputs on the basis of my orientations and then
attached all radiation output of TYPE 16 as an input in TYPE 56 does it
will

work? and give me the total solar energy gain inside???

Regards
Adnan

On Sun, Sep 11, 2016 at 3:18 AM, Jeff Thornton <thornton at tess-inc.com>
wrote:

> Use more than one Type 16 hooked up to the single Type 9.
>
> Jeff Thornton
> TESS
>
> Sent from my iPhone
>
> > On Sep 10, 2016, at 6:55 AM, adnan rasheed via TRNSYS-users <
> trnsys-users at lists.onebuilding.org> wrote:
> >
> > Hello everyone,
> >
> > My question is about TRNSYS type 9 (weather data reader) and type 16
> (radiation processor). I am using feild weather data to apply to a building
> 3d model by using type 56. I have 17 surfaces (beacause of my roof design)
> in the model and type 16 only allows 8 surfaces to give output for,
> >
> > when i connect 3d model with type 15 (weather data reader and processor)
> it automatically connect 17 surfaces. But I cannot use type 15 because I
> need to use my own weather data in text file. How can I deal with that.
> >
> >
> >
> > Best regards
> >
> > Adnan
> > PhD student
> > _______________________________________________
> > TRNSYS-users mailing list
> > TRNSYS-users at lists.onebuilding.org
> > http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20160911/68744ef8/attachment-0002.htm>