[TRNSYS-users] Type 16 (radiation processor)

[Jeff Thornton via TRNSYS-users]

Use more than one Type 16 hooked up to the single Type 9.

Jeff Thornton
TESS

Sent from my iPhone

> On Sep 10, 2016, at 6:55 AM, adnan rasheed via TRNSYS-users <trnsys-users at lists.onebuilding.org> wrote:
> 
> Hello everyone,
> 
> My question is about TRNSYS type 9 (weather data reader) and type 16 (radiation processor). I am using feild weather data to apply to a building 3d model by using type 56. I have 17 surfaces (beacause of my roof design) in the model and type 16 only allows 8 surfaces to give output for, 
> 
> when i connect 3d model with type 15 (weather data reader and processor) it automatically connect 17 surfaces. But I cannot use type 15 because I need to use my own weather data in text file. How can I deal with that.   
> 
> 
> 
> Best regards 
> 
> Adnan 
> PhD student
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org