[TRNSYS-users] Connecting Type56 and fan coil

[吴伟伟]

Dear all, 
 
     I tried to model two zones(each room is a zone, i.e. two rooms) with each has a fan coil in it in a building, while other rooms(zones) have no conditioning system. The air conditioning system is outside of the building, i.e. I set cooling “off” in Trnbuild.
 
 
 
1.How do I know that the first fan coil is assigned to zone1( room1)? While the second fan coil conditioned for zone2 (room2) not for other zones?
 
 
 
 
 
2. In fact, I still can not figure out how the fan coil is link with Type 56, although it is very common in HVAC system. Am I right for the following setting?
 
 
 
I named inputs in type56 like “Q_cooling_1” “Q_heating_1, “Q_cooling_2” “Q_heating_2 respectively. I wish that the first fan coil ’s output “air-side heat transfer” link with room1’s “Q_cooling_1” “Q_heating_1, while the second fan coil ‘s output” “air-side heat transfer” link with the “Q_cooling_2” “Q_heating_2.
 
 
 
Thank you for your time and patience.
 
 
 
Yours sincerely
 
Wu weiwei
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20141202/b1c1ba68/attachment-0004.htm>