[TRNSYS-users] Connecting Type56 and fan coil

[David BRADLEY]

Weiwei,
   If you have access to the TESS HVAC Library then I would recommend 
that you look at the example:

..\Trnsys17\Tess Models\Examples\HVAC Library\Restaurant_3_systems.tpf

Regards,
  David


On 12/2/2014 01:29, ??? wrote:
>
> Dear all,
>
> I tried to model two zones(each room is a zone, i.e. two rooms) with 
> each has a fan coil in it in a building, while other rooms(zones) have 
> no conditioning system. The air conditioning system is outside of the 
> building, i.e. I set cooling "off" in Trnbuild.
>
> 1.How do I know that the first fan coil is assigned to zone1( room1)? 
> While the second fan coil conditioned for zone2 (room2) not for other 
> zones?
>
> 2. In fact, I still can not figure out how the fan coil is link with 
> Type 56, although it is very common in HVAC system. Am I right for the 
> following setting?
>
> I named inputs in type56 like "Q_cooling_1" "Q_heating_1, 
> "Q_cooling_2" "Q_heating_2 respectively. I wish that the first fan 
> coil 's output "air-side heat transfer" link with room1's 
> "Q_cooling_1" "Q_heating_1, while the second fan coil 's output" 
> "air-side heat transfer" link with the "Q_cooling_2" "Q_heating_2.
>
> Thank you for your time and patience.
>
> Yours sincerely
>
> Wu weiwei
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20141202/04e07753/attachment-0004.htm>