[TRNSYS-users] Creat new component

[David BRADLEY]

Alobaid,
   The compiler project settings are a very important part of writing a 
new component. The answer to your question depends somewhat on whose 
Fortran compiler you are using. If you have access to the Intel Fortran 
compiler that plugs into Microsoft Visual Studio then there are projects 
with correct settings already available to you in the 
..\Trnsys17\Compilers\ directory. If you are using a different Fortran 
compiler then you are going to need to figure out how to make those same 
settings in your compiler. If you want a comprehensive list of the 
settings, please let me know and I can send them to you. You will 
probably have a great deal of work ahead of you to figure out how to 
make those same settings in the compiler that you are using but it may 
be a place to start.
Best,
  David


On 11/29/2014 18:50, Mohammad Alobaid wrote:
>
> Hi every one,
>
> I want to ask about creating new component in Trnsys17. I already 
> installed  Fortran 95 and when I follow the procedures, I can't find 
> type201.dll.  I think there is an error in the link between Trnsys and 
> the new component's file. Could you please help in this.
>
> Many Thanks
>
> Alobaid
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20141201/d0cb147a/attachment-0003.htm>