[TRNSYS-users] tapping into parameter info
jeannieboef
jeannieboef at googlemail.com
Sat Feb 18 13:43:30 PST 2012
Dear Group,
I was playing with a fan object. I was setting up sending it a control
signal between 1 and 0 (1 = max flow rate, 0 = no flow) when I
realized that although one can print or graph the user defined
parameters of an object, one cannot use them in the information flows
via the links. Is there a workaround to tap into this info (except
editing source code for extra outputs and compiling...just realized I
need to install a fortran compiler after trying to compile an edit via
trnsys)?
Regards,
Jean
Sent from my iPhone
On 16.02.2012, at 21:55, "Marcus (Ben) Jones " <jones.bm at gmail.com>
wrote:
> Sent that by accident before I was finished, but I was going to say;
> it makes for some 'interesting' setups if you have ie multiple pumps
> feeding the same branch. In fact pump inputs have no bearing on
> performance, it only sevres as a first law check.
>
> Cheers,
>
> Marcus
>
> On 2012-02-16 9:26 PM, "Marcus (Ben) Jones" <jones.bm at gmail.com>
> wrote:
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120218/fe3795aa/attachment-0005.htm>
More information about the TRNSYS-users
mailing list