[TRNSYS-users] TRNSYS ERROR (dll loaded but not found)

Timothy McDowell mcdowell at tess-inc.com
Tue Jul 12 14:08:10 PDT 2011


Aaron -Actually that is not true.  The proforma does not access the dll to cycle the number of inputs/outputs based on the value of a parameter.  From the error message that you sent in your original message I call tell you that TRNSYS is not finding Type203 exported from the dll.  You will need to ask the person that supplied you with the dll to check the code for correct usage of the DLLexport command.Regards,Tim   ---------------------------------- Timothy McDowell Executive Vice President Thermal Energy System Specialists, LLC 22 N. Carroll St, Suite 370 Madison, WI 53703 Phone: 608-274-2577 Fax: 608-278-1475    ----- Original Message -----From: "Aaron J. Danenberg" >;danenberg at hartford.edu 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110712/618b8d5a/attachment-0001.htm>


More information about the TRNSYS-users mailing list