[TRNSYS-users] TRNSYS-users Digest, Vol 67, Issue 12

[ghetu mariana]

Hello,
 
Has anyone had this kind of error message?
“Error in automatic heat transfer calculation for surface
399 or its adjacent surface!: Automatic heat transfer calculation is only
allowed on surfaces within a zone. Please check building input file.”
 
Surface 399 is adjacent and the wall time has the front  convective heat transfer coefficient set to 11
kJ/h,m2K and the back to 12 kJ/h,m2K. It’s supposed to be working this way but
I have the same error message.
 
Thanks in advance, 

Mariana GHETU


________________________________
From: "trnsys-users-request at cae.wisc.edu" <trnsys-users-request at cae.wisc.edu>
To: trnsys-users at cae.wisc.edu
Sent: Tue, 6 July, 2010 20:20:51
Subject: TRNSYS-users Digest, Vol 67, Issue 12

Note: Forwarded message is attached.

Send TRNSYS-users mailing list submissions to
    trnsys-users at cae.wisc.edu

To subscribe or unsubscribe via the World Wide Web, visit
    https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
or, via email, send a message with subject or body 'help' to
    trnsys-users-request at cae.wisc.edu

You can reach the person managing the list at
    trnsys-users-owner at cae.wisc.edu

When replying, please edit your Subject line so it is more specific
than "Re: Contents of TRNSYS-users digest..."
Today's Topics:

   1. Re: windows in Trnsys (David Bradley)
   2. Re: type 557 run time error 6 overflow (David Bradley)
   3. Re: problem (David Bradley)
_______________________________________________
TRNSYS-users mailing list
TRNSYS-users at cae.wisc.edu
https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users



      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100706/e4d9fe30/attachment-0005.htm>