[TRNSYS-users] Simulation Studio running problem

QiChao Zhu QiChao.Zhu at sg.panasonic.com
Mon Jan 18 23:52:11 PST 2010


Hi everyone,

So far as my understanding, the procedure to build a redistributable
program is two-step stage:

1.       We build a scenario with components in "Simulation Studio" to
testify our idea.

2.       We create an input file with .trd extension which should be
used in TRNEdit program to build an executable program which is
redistributable. 

Now the issue occurs between the steps. For example, I create a very
simple scenario with two components, one data reader and one online
plotter without file. The data reader is supposed to read
44640(=31x24x60) values from a file output it to the plotter. The data
is supposed to represent a power plant's output in January that the
simulation timestep is 1 min. At first I run it without checking "Write
Trnsed Commands" in Controlling cards settings. It displays correctly
44640 values in output figure( time axis in hour step, so it will plot
value from 0-744(31x24) ). Then I check "Write Trnsed Commands" and
rerun the simulation. The output can only be from 0-672 (28 x 24). I
find that there is no such 31 value setting in Length.dat file. But even
I add such setting it still can't work correctly. Now my question is why
the Simulation Studio can't work properly only with "Write Trnsed
Commands" in different conditions. This problem is a big obstacle for us
to build a correct redistributable as the results are different based on
the same input files! Looking forward to your help. Thanks.

 

Regards,

qichao

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100119/d7151f58/attachment-0001.htm>


More information about the TRNSYS-users mailing list