[TRNSYS-users] Trnsed Distributable

[Kent Beason]

I've created a Distributable file and copied all files that I need into
the same directory.  I am getting a fatal error when running the
Distributable by itself.  I don't get any errors when I run the
simulation within Trnedit.  The error reads as follows:

 

*** Fatal Error at time   :         0.000000

    Generated by Unit     :    33

    Generated by Type     :    96

    TRNSYS Message     71 : An ASSIGNED logical unit number is already
in use, either by the TRNSYS kernal or by a Type

    Reported information  : Not available

 

Attached is the section within the .trd file for Type 96 as used in my
simulation.  I've scoured it without finding obvious problems.  I
haven't found the logical unit numbers duplicated elsewhere in the list
file either.

 

Any deeper insights on what may be the problem, or other things to
check, would be most appreciated.

 

Kent Beason

Schlitterbahn Development Group

830-609-8904 m

830-608-8040 f

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20091119/f5fdf2aa/attachment-0001.htm>
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: Unit 33 Type 96.txt
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20091119/f5fdf2aa/attachment-0001.txt>