[TRNSYS-users] Trnsed Distributable

[David Bradley]

Kent,
 Try setting the logical unit parameters referenced by Type96 (and the 
logical units in the corresponding ASSIGN statements) to some other 
numbers (953, 954, 955 for example). There are some spots in the Trnsys 
kernel where a logical unit number is internally assigned to a temporary 
file that needs to be opened up. The kernel tries to pick a logical unit 
that isn't otherwise needed but it doesn't always succeed.
Best,
 David


Kent Beason wrote:
>
> I've created a Distributable file and copied all files that I need 
> into the same directory.  I am getting a fatal error when running the 
> Distributable by itself.  I don't get any errors when I run the 
> simulation within Trnedit.  The error reads as follows:
>
>  
>
> *** Fatal Error at time   :         0.000000
>
>     Generated by Unit     :    33
>
>     Generated by Type     :    96
>
>     TRNSYS Message     71 : An ASSIGNED logical unit number is already 
> in use, either by the TRNSYS kernal or by a Type
>
>     Reported information  : Not available
>
>  
>
> Attached is the section within the .trd file for Type 96 as used in my 
> simulation.  I've scoured it without finding obvious problems.  I 
> haven't found the logical unit numbers duplicated elsewhere in the 
> list file either.
>
>  
>
> Any deeper insights on what may be the problem, or other things to 
> check, would be most appreciated.
>
>  
>
> **Kent Beason**
>
> Schlitterbahn Development Group
>
> 830-609-8904 m
>
> 830-608-8040 f
>
>  
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users

-- 
***********************************************************************
Thermal Energy System Specialists (TESS), LLC 
David BRADLEY                      22 N. Carroll Street - Suite 370 
Partner                            Madison, WI 53703 
                                   USA
P: +1.608.274.2577 
F: +1.608.278.1475
E-mail: bradley at tess-inc.com 
Web Pages:  http://www.tess-inc.com    and      http://www.trnsys.com

***********************************************************************

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20091120/fd9b349c/attachment-0001.htm>