[TRNSYS-users] Radiator Heating in a multi zone

[Feargal Murray]

Hi all

I'm very new to TRNSYS, and trying hard to model  a 2 storey domestic dwelling. I have used 2 zones upstairs & 2 zones downstairs, 1 of each north facing and south facing. My first question is - how do I model an oil fired burner connected to radiators for Central heating & DHW? The power output of the burner is 17kW approx. Should I model it through the heating tab in Type 56? if so, how do I divide it up between the 4 zones and the radiators? The burner is located in the 1st zone.

Thanks for reading

Feargal