[TRNSYS-users] Type 8b strikes back

[Stefan de Kool]

Dear all,

 

I have a problem with type 8b in Trnsys 16. It gives strange values, see
simple test case attached. I had this problem before in trnsys 15 but upon
Diego's kind advice I put a Type 93 (value recall) before type 8b to use the
temperature of the prev timestip. This worked well. But now the problem
emerges again in T16 and type 93 does not help this time.

 

I tried changing about every paramter, to no avail. Also changing the no. of
oscillations permitted doesn't work.

 

Any suggestions?

 

Regards


Stefan de Kool


Cauberg-Huygen Raadgevende Ingenieurs BV


Bezoekadres:

Boterdiep 48, 3077 AW Rotterdam


Postadres:

Postbus 9222, 3007 AE Rotterdam


Telefoon:

010 - 2443638 (direct) 

010 - 4257444 (secretariaat)


Fax:

010 - 4254443


E-mail:

s.dekool at chri.nl


Web:

www.chri.nl


 

 


KvK-nummer:

14623897


Disclaimer:

Op deze e-mail is een disclaimer van toepassing / A disclaimer is applicable
to this e-mail, please refer to:
http://www.chri.nl/emaildisclaimer

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20080307/5d4bbc84/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/gif
Size: 7599 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20080307/5d4bbc84/attachment-0001.gif>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Test_Type8b.tpf
Type: application/octet-stream
Size: 49195 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20080307/5d4bbc84/attachment-0001.obj>