[TRNSYS-users] unexpected error with TRNSYS type10

[Timothy McDowell]

Fen -
 
The thing I see right away is that you have a variable name of control_gt in an equation block.  Variable names cannot start with the letters "con".
 
Regards,
 
Tim

---------------------------------- 
Timothy McDowell 
Executive Vice President 
Thermal Energy System Specialists, LLC 
2916 Marketplace Dr, Suite 104 
Madison, WI 53719 
Phone: 608-274-2577 
Fax: 608-278-1475

----- Original Message ----- 
Subject: [TRNSYS-users] unexpected error with TRNSYS type10 
From: fen.he at power.alstom.com 
Date: Tue, August 7, 2007 8:28 




 


Hello TRNSYS users, 
  
We've got a problem with the "type 10 rock bed storage" of Trnsys Simulation Studio 16. When  the segment number is set to more than 13 (in DERIVATIVES ), we obtain the error message of "Range check error" and then "Unexpected error was encountered and TRSYS will abort".   

It is indicated by the manual of "Input-Output-Parameter" that the valid range for segment number is 1 to 40.  We also checked the source code of TYPE 10, but failed to find a solution.  Do you think it is due to the constrain of input parameters? 

We attched a very simple example to show how it happens.  It is highly appreciated if you can check it and can give us some suggestions. 
  
Thanks and best regards, 
Fen 


:._______________ 


_______________________________________________
TRNSYS-users mailing list
TRNSYS-users at engr.wisc.edu
https://www.cae.wisc.edu/mailman/listinfo/trnsys-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20070807/99ab6918/attachment-0005.htm>