[TRNSYS-users] [SOLVED]Re: Error message

[Olivier Guillemot]

Thanks a lot for your help, I'll try that.

olivier

Diego A. Arias a écrit :
> Dear Olivier,
>
> The problem is that the component is not setting the number of outputs 
> in the INFO array.
> The component runs fine if you add the line
> INFO(6) = 3
> after the ENDIF corresponding to the checking  for INFO(7) = -2.
> My recommendation is that you update the component to a fully TRNSYS16 
> component. Please follow the instructions in the manual 'Volume 
> 8-Programmer's guide'.
> Best regards,
>
> Diego
>
> Olivier Guillemot wrote:
>> for sure...
>>
>> thanks
>> olivier
>>
>> keilholz, werner a écrit :
>>> Dear Oliver,
>>> I'm not sure what you attempt to do, but this error sounds as if you
>>> declared more outputs in a type than the type actually handles.
>>> Which type are you trying to use ?  Maybe you should show us the 
>>> Proforma
>>> you made ?
>>>
>>> Werner
>>>
>>> -----Message d'origine-----
>>> De : trnsys-users-bounces at engr.wisc.edu
>>> [mailto:trnsys-users-bounces at engr.wisc.edu] De la part de Olivier 
>>> Guillemot
>>> Envoyé : vendredi 7 juillet 2006 08:51
>>> À : trnsys-users at engr.wisc.edu
>>> Objet : [TRNSYS-users] Error message
>>>
>>> Hi,
>>>
>>> I tried to create a new proforma from a fortran code founded on 
>>> http://sel.me.wisc.edu/trnsys but I have the following error : The 
>>> listed input referenced an output number beyond the allocated 
>>> outputs for the connected type.
>>>
>>> Do you have any idea?
>>>
>>> regards,
>>> olivier
>>>
>>>
>>> _______________________________________________
>>> TRNSYS-users mailing list
>>> TRNSYS-users at engr.wisc.edu
>>> https://www.cae.wisc.edu/mailman/listinfo/trnsys-users
>>>
>>>
>>>   
>> ------------------------------------------------------------------------
>>
>> _______________________________________________
>> TRNSYS-users mailing list
>> TRNSYS-users at engr.wisc.edu
>> https://www.cae.wisc.edu/mailman/listinfo/trnsys-users
>>   
>
>