[TRNSYS-users] Range check error

[Olympia Zogou]

Dear Trnsys users,

I have some problems to "run simulation" in project made by TRNSYS 15, with TRNSYS 16. It is a building simulation project with type 56.
I have translate the old project from TRNSYS 15 to TRNSYS 16 without loosing the old conections. 
The project runs very well in TRNSYS 15,
but when I try to run it, in Trnsys Simulation Studio (TRNSYS 16)  I get the next messages
" Range check error "

After clicking the OK BUTTON, I get 

An unexepected error was encountered and TRNSYS will abort.

Open the list file I see warnigs and notices. The most of the notices
are related with TYPE 501(Ground Temperature Model - Utility Library TESS).
Is the only model I use from TESS library (see attached file  building.lst)

Any hints would be welcome.

best regards 

 

Olympia



Dipl.-Ing. Olympia Zogou

Laboratory of Thermodynamics & Thermal Engines

Department of Mechanical & Industrial Engineering

University of Thessaly

Pedion Areos, 383 34 Volos, Greece

Tel. (+3024210) 74013, Fax (+3024210) 74096, 

E-mail: olyz at uth.gr

http://www.mie.uth.gr/labs/ltte/info/info.htm
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20050118/558c2025/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: building.lst
Type: application/octet-stream
Size: 7441 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20050118/558c2025/attachment-0001.obj>