[TRNSYS-users] Cooling tower model

[Bharath Krishna Karambakkam]

Hi,
     We are using a chiller model with a TYPE 51b (user supplied coefficients) cooling tower model coupled to a TYPE 56 building. For one of the building constructions the internal loads very high and requires cooling in the winter when the outdoor air temperature is about 40 F. Under such circumstances the chiller gives an warning:

THE CORRELATION FOR THE SATURATION TEMPERATURE USED IN THE COOLING TOWER MODEL WAS USED WITH AN ENTHALPY VALUE OUTSIDE THE ALLOWABLE RANGE

     The mass transfer exponent and constant are set to 5 and -0.35 respectively. The sump is turned off by setting it to -1 and the model is set to run on fan power.

Could anyone please let me know how I could resolve this
Thanks,
Krishna
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20051201/aa42c1e0/attachment-0001.htm>