[Equest-users] Error Message

Nick Caton ncaton at smithboucher.com
Thu Mar 4 16:43:01 PST 2010


That error is one I've encountered a good number of times in the past.  It's not unique to eQuest and is a potential warning sign regarding the stability of your computer.

 

1.       Strongly suggest backing up your project files, working on another computer and leaving this computer alone until this is resolved if that's an option to you.  If you find you get the same errors on another computer, ignore the rest of this email as it's something specific to your file and will require some eQuest-specific support (Step  #4 below may help).

2.       The error suggests there's a problem with the memory not unloading instructions after reading them.  What that likely means in my experience is something is up either with your Windows OS and/or a hardware issue with your RAM.

3.       Be sure your current Windows installation is fully patched.  Start à Internet Explorer à Tools à Windows Update.  Each round of service packs/packages will generally require a reboot.  Rinse and repeat until all critical items are installed.

4.       Won't hurt to uninstall and reinstall eQuest at this point.

5.       Try the same operations again.

 

If you get the same behavior after updating windows, try isolating sticks of RAM in your computer and/or swapping with another set of RAM to see if you can associate the problem with a specific stick of RAM.

 

If after those two investigations you're still getting that error consistently (and again not on another computer), I personally would take it as a sign that a prompt data backup, fresh format and reinstallation of windows is in order.  

 

Hope this helps troubleshoot!

 

~Nick

 

 

NICK CATON, E.I.T.

PROJECT ENGINEER

25501 west valley parkway

olathe ks 66061

direct 913 344.0036

fax 913 345.0617

Check out our new web-site @ www.smithboucher.com 

 

From: equest-users-bounces at lists.onebuilding.org [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Richard Yam
Sent: Thursday, March 04, 2010 6:12 PM
To: equest-users at lists.onebuilding.org
Subject: Re: [Equest-users] Error Message

 

Hi,

 

I'm getting the following error which causes the program to abort:


The instruction at "0x73dd11c7" referenced memory at "0x00000004". The
memory could not be "read".

 

The changes which seem to cause this error are lowering the lighting power density or shading coefficient. When I revise these numbers back up the error is gone, but I need to lower my numbers to simulate the building.

 

I don't know if the error is caused by these changes or if it may be Windows based. Any suggestions?

 

Thanks,

 

 

Richard Yam, P. Eng.

LEED Accredited Professional

Project Manager

 

BYCAR Engineering Ltd.

105a - 7808 132nd Street

Surrey, BC V3W 4N1

Ph. 604 591-2766    Fax 604 591-2733

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100304/8ac8a54c/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 1459 bytes
Desc: image001.jpg
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100304/8ac8a54c/attachment.jpeg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 1974 bytes
Desc: image002.jpg
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100304/8ac8a54c/attachment-0001.jpeg>


More information about the Equest-users mailing list