[Equest-users] Error Message

[Carol Gardner]

If you zip up the .pd2 and .inp of the file with the error chances are
someone may be able to help you.
Carol

On Thu, Mar 4, 2010 at 4:12 PM, Richard Yam <RichardY at bycar.ca> wrote:

>  Hi,
>
> I'm getting the following error which causes the program to abort:
>
> The instruction at "0x73dd11c7" referenced memory at "0x00000004". The
> memory could not be "read".
>
> The changes which seem to cause this error are lowering the lighting power
> density or shading coefficient. When I revise these numbers back up the
> error is gone, but I need to lower my numbers to simulate the building.
>
> I don't know if the error is caused by these changes or if it may be
> Windows based. Any suggestions?
>
> Thanks,
>
>   Richard Yam, P. Eng.
> LEED Accredited Professional
> Project Manager
>
>  BYCAR Engineering Ltd.
> 105a - 7808 132nd Street
> Surrey, BC V3W 4N1
> Ph. 604 591-2766    Fax 604 591-2733
>
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100304/17e370eb/attachment.htm>