[TRNSYS-users] Thermal air flow between two air nodes

[David BRADLEY]

Colin,

  We are moving this email list to a forum. I posted your question and 
answered it at: www.trnsys.org/community

kind regards

  David


On 5/9/2023 8:11 AM, Colin Basile via TRNSYS-users wrote:
>
> Hello,
>
> I need some help about Trnsys 3D model to write my thesis.
>
> I would like to model an air flow from a living room on the first 
> floor to a room on the upper floor through a void.
>
> The goal is to evacuate the overheating via windows that can open on 
> the roof.
>
> To do this, I used virtual surfaces but the air exchange between the 
> different thermal zones is blocked.
>
> Would you have a solution to simulate the air flow between two thermal 
> zones according to the temperatures?
>
> Thanks a lot,
>
> Basile Colin student of the University of Liege.
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy System Specialists, LLC
3 North Pinckney Street - suite 202
Madison, WI  53703 USA

P:+1.608.274.2577
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20230510/50f8b87f/attachment.htm>