[TRNSYS-users] TRNSYS model and simulation

[ARCHIT MAHAWAR 19BME0489]

On Fri, 31 Mar, 2023, 2:00 pm ARCHIT MAHAWAR 19BME0489, <
archit.mahawar2019 at vitstudent.ac.in> wrote:

> Here the TRNSYS model and simulation results have been attached. The
> results needed should be temperature within 55 to 60 deg C. The blue line
> denotes the AVG TANK TEMP and red line shows TANK OUTLET TEMP. The red line
> has max temp of 48 deg C and is not falling within the required temp range.
> This model is for a solar assisted heat pump for hot water generation. Can
> anyone suggest whether a thermostat should be used and how to connect it.
> Thank You.
>

-- 
**Disclaimer:*
This message was sent from Vellore Institute of Technology.  
The contents of this email may contain legally protected confidential or 
privileged information of “Vellore Institute of Technology”.  If you are 
not the intended recipient, you should not disseminate, distribute or copy 
this e-mail. Please notify the sender immediately and destroy all copies of 
this message and any attachments. If you have received this email in error, 
please promptly notify the sender by reply email and delete the original 
email and any backup copies without reading them.*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20230401/afa36942/attachment.htm>